C-311

Techincal specifications

System:

Test throughput:

Reagent concept:                     

• Barcoded cobas c reagent packs with convenient packaging & ready –to –use reagents.

Onboard reagent capacity:

• Up to 45 assays (42 cooled cassette slots + channels for ISE).

Programmable parameters:

• Up to 117 photometric, 3 Ise tests, 8 calculated parameters & 3 serum indices.

Sample types:

• Serum, Plasma, Urine, CSF & Whole Blood.

Onboard sample capacity:

• 108 positions with continuous access & STAT interrupt capability.

Sample container types:           

• Primary tubes:   5-10ml (16x 100, 16x75, 13x100, 13x75 mm)

• Sample cup   :     2.5 ml

• Micro cup      :     1.5 ml

• Cup on tube

Sample volume:                       

• to 35 µl in 0.1 µl steps.

Sample clot detection:             

• Yes

Minimum sample volume:        

• Primary tubes:   700 µl

• Sample cup   :   100 µl

• Micro cup      :     50 µl

Sample barcode types:             

• Code 128, codabar (NW 7), Interleaved 2 of 5, code 39.

System interfaces:                    

• Touchscreen PC, RS 232 serial interface, bi-directional.
• Cobas link (TeleService and auto download).

Sample database:                     

• 10,000 routine/STAT samples.

Test methods:              

• 1 point, 1point+ prozone check, 2 point, 2 point kinetic, 2 point + prozone check,3 point, 1 point + kinetics, rate a, rate a + serum index, rate a with blank, Rate B.

Calibration methods:                

• Linear, non-linear multi-points, 2 point calibration, K-factor, up to 100 calibrators pre-programmable, storage of up to 180 curves; Preventive calibration of stand – by cassettes.

QC methods:                

• Real-time, individual & cumulative QC; Auto QC; Up to 100 different controls pre-pro-grammable, Preventive QC after calibration of stand-by cassettes.

Rerun/repeat/reflex:                  

• Automatic rerun/manual reruns, repeats & automatic reflex supported.

Electrical requirements:           

• Power requirements:230/400 Volts AC 3/N/PE, 110 Volts AC 1.5 kVA.

•  Frequency             : 50Hz or 60hz +/- 0.5%.

Water/waste requirements:

• Water quality        :Bacteria free, de-ionised water supply    resistnce of 1.0 µS/cm max.

• Water consumption: Up to 12 l/hr during operation.

• Water Pressure     : 0.5- 3.5 kg/cm3  (49- 343 KPa).

• Water temperature :15 to 30®C.

• Biohazards waste  : Separate container located in the system.

• Wall drain for waste:  100  mm above the floor.

Regulatory compliance:           

• GS,CE, UL, C-UL compliant.

Operating conditions:              

• Ambient temperature/humidity: 15 to 32®C/30 to 85% (RH, without condensation)

 ·